>

Enter Your Email To Sign Up
For Our E-Newsletter:


You are here:Home > DRYING TUMBLERS > Stacked 30 Pound Capacity Models Starting Serial No. DTCK9401011756 > Electronic Control
NA 431392P Control Harness Assembly CD control suffix

NA 431390P Main Wire Harness Assembly Lower; 120 Volt/50 or 60 Hertz; 208-240 Volt/60 Hertz; 240 Volt/50 Hertz

NA 431389P Main Wire Harness Assembly Upper; 120, 208-240 Volt/50 or 60 Hertz; 240 Volt/50 Hertz

NA 431391P Microprocessor Wire Harness Assembly Models starting Serial No. DTCK941xxxxx

NA 613P3 Microprocessor Wire Harness Kit Models starting Serial No. DTCK9401011757 through Serial No. DTCK9410000000

NA 44089301P Lock, Key and Nut Kit RL001; Can be used to replace items 1 and 2

NA 44089302P Lock, Key and Nut Kit RL002; Can be used to replace items 1 and 2

1 430664 Coin Drop Key

2 430832P Microprocessor Door Lock

3 431232 Control Panel Overlay Models SCD32DG and STD32DG; Upper left

3 431234 Control Panel Overlay Models SCD32DG and STD32DG; Lower right

3 431297 Control Panel Overlay Models JCD32DG and JTD32DG; Upper left

3 431298 Control Panel Overlay Models JCD32DG and JTD32DG; Lower right

3 70379901 Control Panel Overlay Models SCD32DG and STD32DG; Left overlay covers coin drop; Top

3 70380001 Control Panel Overlay Models SCD32DG and STD32DG; Right overlay covers coin drop; Bottom

3 70380101 Control Panel Overlay Models JCD32DG and JTD32DG; Left overlay covers coin drop; Top

3 70380201 Control Panel Overlay Models JCD32DG and JTD32DG; Right overlay covers coin drop; Bottom

4 431516 Control Panel Door

5 501524 Screw

6 M414050P Control Kit 120 Volt/60 Hertz

6 M411883P Control Kit 240 Volt/50 Hertz

7 431213 Control Housing Seal

8 431159 Lint Drawer Switch Rocker; Replaced items 6 and 7 on models starting Serial No. 9603001663

9 501453 Magnet Models through Serial No. 9603001662

10 34599 Reed Switch Models through Serial No. 9603001662

11 29786 Nut

NOTE: Individual wires are not available separately. Order complete harness, or order wire by the foot. When applying terminals
to wires, it is recommended that the terminals be soldered to the wires.

Copyright ©  LAUNDRY PARTS 4 U. All Rights Reserved. Built with Volusion